Release Notes for TIBCO® Spotfire® Server 3.1.1

This file contains important information about TIBCO® Spotfire® Server 3.1.1.
For the latest version of this file, see Release notes for TIBCO® Spotfire® Server 3.1.1.

Content

System Requirements
Installation and Configuration
Migration from TIBCO® Spotfire® Analytics Server 10.1
Upgrade from TIBCO® Spotfire® Server 3.0
Known Issues
  General
  Installation
  Migration
  Upgrade
  Configuration and Administration
  Information Services
Support

System Requirements

See the TIBCO® Spotfire® Server System Requirements web page for a detailed description of the system requirements for TIBCO® Spotfire® Server 3.1.1.

Installation and Configuration

Important note:
TIBCO Spotfire Server 3.1.1 is a maintenance release. If you already have version 3.1.0 installed, there is no need to install version 3.1.1 (unless you are in the process of upgrading from 3.0.0/3.0.1 and are affected by the first issue listed below). This release contains fixes for the following issues:

• Unable to start the Server Upgrade tool (used for upgrading from 3.0.0/3.0.1 servers) on Solaris/LINUX Operating Systems.
• When authenticating against multiple LDAP Servers, users not existing in all LDAP Servers will fail to authenticate (also fixed in TIBCO Spotfire Server 3.1.0 patch A59140)

It is very important that you read the Installation and Configuration Manual on how to install and configure TIBCO® Spotfire® Server 3.1.1.

1. Run the supplied SQL scripts to generate the new 3.1.1 database, unless you intend to upgrade a 3.0 installation.
2. Install TIBCO® Spotfire® Server 3.1.1.
3. After installing the server, please register the product on the http://support.spotfire.com/dsregister/ web page.
4. If you intend to migrate from a 10.1 server to a 3.1.1 server, the recommended procedure is to complete the migration of data and configuration before starting the 3.1.1 server, see Migration from TIBCO® Spotfire® Analytics Server 10.1.
5. Start the server and launch the TIBCO® Spotfire® Configuration Console to perform the Server configuration. Note that the URL for the Configuration Console has changed from http://server:port/admin, for version 3.0, to http://server:port/config, for version 3.1.1.

Migration from TIBCO® Spotfire® Analytics Server 10.1

You must install TIBCO® Spotfire® Server 3.1.1 according to steps 1 through 3 above before you can do the migration.

It is very important that you read the Migration section in the TIBCO® Spotfire® Server 3.1.1 Installation and Configuration Manual.

1. Install the TIBCO® Spotfire® Server 3.1.1 Migration Tool.
2. Shut down the TIBCO® Spotfire® Analytics Server 10.1.
3. Run the migration tool on the TIBCO® Spotfire® Analytics Server 10.1.

Upgrade from TIBCO® Spotfire® Server 3.0

During TIBCO® Spotfire® Server 3.1.1 installation you can choose to upgrade from an existing TIBCO® Spotfire® 3.0 installation.

It is very important that you read the Upgrade section in the TIBCO® Spotfire® Server 3.1.1 Installation and Configuration Manual.

1. Shut down the TIBCO® Spotfire® Server 3.0.
2. At the end of the TIBCO® Spotfire® Server 3.1.1 installation, choose to perform an upgrade.
3. Perform the upgrade according to the TIBCO® Spotfire® Server Installation Manual.
4. If the Composite JDBC driver has been deployed on the 3.0 server, it will be automatically moved to the 3.1.1 server during upgrade. We recomend that you always upgrade to the latest version of the Composite JDBC driver.

Known Issues

General

• Avoid group names containing single quote characters. It is possible to create such a group but it will be unusable.
• On the Windows operating system, if the msvcr71.dll is not found in the path when starting the Windows service for the TIBCO® Spotfire® Server, it will fail to start. To remedy this problem, copy the msvcr71.dll from the <installation-directory>\jdk\bin directory to either the <installation-directory>\tomcat\bin folder or to the Windows system32 folder.
• When installing on a Windows operating system and creating a Windows service for the TIBCO® Spotfire® Server, an empty TIBCO® Spotfire® Server folder will be created on the start menu.
• If you run the TIBCO® Spotfire® Server on a machine with very little memory, shutting down the TIBCO® Spotfire® Server might cause the shutdown process to run out of memory. If this occurs you need to manually terminate the Tomcat process.
• If you use OpenSSL on a Windows operating system to generate X.509 certificates, beware that international characters in certificates will not work. We recommend Microsoft Certification Authority Services to be used instead.
• There is an issue using the mod_auth_sspi module out-of-the-box with Apache httpd and NTLM authentication. Please contact TIBCO Spotfire Support for information on how to resolve this issue.
• With Microsoft Internet Explorer patch KB974455 applied, there is an issue with running Kerberos over SSL using Java SE 6, see Sun Bug ID 6851973.

Installation

• If you choose not to install the Configuration Console you will get a warning in the installation log. The installation will still complete successfully.
• If you try to download third party components during installation, without an internet connection, you will get a warning in the installation log. The installation will still complete successfully. If your configuration depends on those third party components you will have to download them manually. Consult the Installation and Configuration Manual for more information.

Migration

• If the Oracle 10g JDBC driver (ojdbc14.jar) has been used in your 10.1 installation it must be temporarily replaced with the Oracle 11g JDBC driver (ojdbc6.jar) or else the migration will not complete successfully. For more information please consult the Installation and Configuration Manual.

Configuration and Administration

• When using Microsoft Internet Explorer, a focus problem in the login dialog for the Configuration Console will force users to click twice in the user name input field before being able to type into it.
• To use the Configuration Console when Enhanced Security is enabled on Windows Server 2003, 2008 and 2008 R2, the server needs to be added to the list of Trusted Sites.
• In the Configuration Console, sometimes you need to click twice in order to select the correct data source template from the drop down menu in the Default Join Database screen.
• In the Configuration Console, sometimes an error message is shown when reverting changes in the Default Join Database screen while another screen has focus. Going back to the Default Join Database screen fixes the problem.
• In the Configuration Console, in the Add Server dialog, clicking OK without specifying a server name or IP address will generate an unexpected error.
• After adding, removing or renaming users in the Administration Console, the users list will be cleared and you will have do a new search to see the effects of the operation.
• When removing a user from a subgroup in the Administration Console the group hierarchy tree will collapse.
• In the Administration Console, the force upgrade flag that can be set during deployment is not persisted in the deployment description and will therefore not reappear in the UI when doing subsequent deployments. In the case where you redeploy packages you will have to set the force upgrade flag again. The flag, if set, is still written correctly to the client manifest file.

Information Services

• Filtering on a column that is defined as DOUBLE can produce incorrect behavior under certain circumstances.
  This is due to a bug in Oracle (According to Oracle, the following bug numbers apply: 1375960, 1569966, 895268).
• Substructure search may fail for structures larger than 4000 bytes if the columns in the query are in a certain order. This is a limitation in Symyx Direct.
• There is a problem with running an Information Link from the Information Library, when using structure search prompting. The Edit structure function is broken; returning this structure to the prompt dialog will not work.
• Accessing stored procedures via Oracle database links does not work.
• Procedures cannot handle parameters of Oracle type Date.
• The server side data pivoting capabilities in Information Services require sub-queries support in the underlying database. Sub-queries are not supported in older databases such as MySQL 4.0.
• Information Services does not support stored procedures using the Teradata database.
• The DataDirect JDBC driver for Oracle reports procedure types as "Pre" instead of "Query". This will not prevent a user from setting the procedure to a query procedure in Information Services.
• Properties are not always converted to data table or column properties correctly when reading an Information Link.
• For pre-version 5.0 Composite JDBC drivers, values of type DATE or TIME created or manipulated in Composite Studio will not show the correct date or time, respectively, in TIBCO® Spotfire®.
• If you use the bundled DataDirect v4.1 Microsoft SQL Server JDBC driver to connect to a database, listing that database might fail if the schema contains overloaded procedure definitions. This is a know issue in the DataDirect JDBC driver. This issue does not occur using the native Microsoft JDBC driver.
• There is an issue with the bundled DataDirect v4.1 Microsoft SQL Server JDBC driver and TIME columns in Microsoft SQL Server 2008. If you try to read this data type through Information Services without supplying a database name on the connection URL the call will fail. This is a known issue with the DataDirect JDBC driver. This issue does not occur using the native Microsoft JDBC driver.

Support

To receive help with problems or to submit comments, please contact us at the TIBCO Support Web site or send an email to support@tibco.com. More news on TIBCO® Spotfire® Server can be found in the online documentation or on the TIBCO Spotfire web site.

The TIBCO® Spotfire® team